808288 Explorer HAT PRO

Explorer HAT PRO

The Explorer HAT and Explorer HAT Pro are the perfect prototyping side-kicks for your Raspberry Pi!
Categorie
Prezzi IVA inclusa
€ 19,65 Prezzo
€ 16,11 + VAT

 

Dettagli

The Explorer HAT and Explorer HAT Pro are the perfect prototyping side-kicks for your Raspberry Pi!

We've added a heap of useful input and output options that will take your projects to the next level. Great for driving motors, using analog sensors, interfacing with 5V systems, and touch (even fruit based!) interfaces.

It's compatible with Raspberry Pi 2, B+, and A+ and comes fully assembled.

Features:

  • Four buffered 5V tolerant inputs
  • Four powered 5V outputs (up to 500mA!)
  • Four capacitive touch pads
  • Four capacitive crocodile clip pads
  • Four coloured LEDs
  • PRO ONLY Four analog inputs
  • PRO ONLY Two H-bridge motor drivers
  • PRO ONLY A heap of useful (unprotected) 3v3 goodies from the GPIO
  • A mini breadboard on top!

5V tolerant inputs - Hook up your Pi to accept input from 5V systems (like Arduino Uno/Leonardo or 5V Trinkets). We've used a 5-channel buffer that will accept anything from 2V-5V as logic high.

5V powered ouputs - The onboard darlington array can supply up to 500mA per channel (but you'll be limited to driving around 1A total from the board). Ideal for stepper motors, solenoids, and relays.

Eight capacitive inputs - Four along the front edge for touch input (labelled 1, 2, 3, 4) and four up the side for attaching crocodile clips to objects (such as fruit, or tin foil) for experimentation!

Four coloured LEDs - Independently controllable LEDs (red, green, blue, and yellow) that make great status indicators.

Four analog inputs (pro only) - A tidy way to integrate analog signals into your project.

Two H-Bridge motor drivers (pro only) - Drive two 5V motors bidirectionally with up to 200mA per channel. Ideal with our micro-metal gear-motors to create the perfect little buggy! You can even soft-PWM for full speed control.

Full Python library, documentation and examples - Head on over to our GitHub to find a Python library, examples, documentation and a brief introduction to Explorer HAT: https://github.com/pimoroni/explorer-hat

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Explorer HAT PRO

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Explorer HAT

    808287 Explorer HAT

    The Explorer HAT and Explorer HAT Pro are the perfect prototyping side-kicks for your Raspberry Pi!
    Tasse escluse:
    € 7,55
    IVA inclusa:
    € 9,21
      Confronta
  2. Explorer pHAT

    809181 Explorer pHAT

    Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi!
    Tasse escluse:
    € 8,94
    IVA inclusa:
    € 10,91
      Confronta
  3. Micro Dot pHAT - Red

    809182 Micro Dot pHAT - Red

    An unashamedly old school LED matrix display board, made up of six LED matrices each 5x7 pixels (for an effective display arefalse
    Tasse escluse:
    € 19,46
    IVA inclusa:
    € 23,74
      Confronta
  4. Four Letter pHAT

    809183 Four Letter pHAT

    Use Four Letter pHAT to display... four letter words. Not that sort!
    Tasse escluse:
    € 8,74
    IVA inclusa:
    € 10,66
      Confronta
  5. Touch pHAT

    809186 Touch pHAT

    Six touch-sensitive buttons to use for whatever your heart desires, with added LEDs (did you expect anything less?)
    Tasse escluse:
    € 7,14
    IVA inclusa:
    € 8,71
      Confronta