The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared light, it can detect transitions from light to dark (lines) or even objects directly in front of it.
The sensor has a 3-pin header which connects directly to the RedBot Mainboard via female to female jumper wires. Use the included RedBot library to detect lines or objects. A mounting hole lets you easily connect one or more of these to the front or back of your robot chassis.
Check out the entire RedBot family of products!
Dimensions: 0.32 x 1.18 " (8.22 x 30.14 mm)
- 5VDC operating voltage
- Mounting hole
- 25mA supply current
- Optimal sensing distance: 0.125" (3mm)
|Part. No. :||SEN-11769|
Questions on RedBot Sensor - Line Follower
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
712567 RedBot BuzzerThis buzzer is an add-on for your RedBot that gives your robot the ability to make awesome beep-boop noises or alerts when sofalseTasse escluse:€ 5,02IVA inclusa:€ 6,12
711999 RedBot Sensor - Mechanical BumperThese simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision falseTasse escluse:€ 5,15IVA inclusa:€ 6,28
712097 RedBot MainboardThe RedBot Mainboard is a robotic development platform that works with the Arduino IDE. The RedBot is a motor driver and ArdifalseTasse escluse:€ 39,99IVA inclusa:€ 48,79
341419 1419 - Zumo Reflectance Sensor ArrayThis reflectance sensor module is designed for use with the Zumo shield for Arduino. It has six IR LED/phototransistor pairs falseTasse escluse:€ 8,79IVA inclusa:€ 10,72
713582 SparkFun Line Follower ArrayThe SparkFun Line Follower Array is a long board consisting of eight IR sensors that have been configured to read as digital falseTasse escluse:€ 26,75IVA inclusa:€ 32,64