- Distance Range: 0.2 - 18 m
- Angular Range: 0-360 degree
- Distance Resolution: 0.5-1.0% (minimum 0.5 mm) @ < 1.5 m
- Angular Resolution: 0.45 - 1.35 degree
- Sample Duration: 0.25 millisecond
- Sample Frequency: 2000 - 8000Hz
- Scan Rate: 5 - 15Hz
The RPLIDAR A2M6 360° Laser Scanner (18 m) is the next generation of 360 degree 2D lidars. The RPLIDAR A2 adopts low cost laser triangulation measurement system developed by SLAMTEC, and therefore has excellent performance in all kinds of indoor environments and outdoor environments without direct sunlight exposure.
It can take up to 8000 samples of laser ranging per second with high rotation speed. And equipped with SLAMTEC patented OPTMAG technology, it breakouts the life limitation of traditional LIDAR system so as to work stably for a long time.
The system can perform 2D 360-degree scan within a 18-meter range. The generated 2D point cloud data can be used in mapping, localization and object/environment modeling.
Before leaving the factory, every RPLIDAR A2 has passed strict testing to ensure the laser output power meets the standards of FDA Class I.
The typical scanning frequency of the RPLIDAR A2 360° Laser Scanner is 10hz (600rpm). Under this condition, the resolution will be 0.9°. And the actual scanning frequency can be freely adjusted within the 5-15hz range according to the requirements of users.
The RPLIDAR A2 consists of a range scanner core and mechanical powering parts which makes the core rotate at a high speed. When it functions normally, the scanner will rotate and scan clockwise. And users can get the range scan data via the communication interface of the RPLIDAR and control the start, stop and rotating speed of the rotatation motor via PWM.
The RPLIDAR A2 comes with a rotation speed detection and adaptive system. The system will adjust the angular resolution automatically according to the actual rotating speed.
- Obstacle Avoidance
- Autonomous Mapping
- Route Planning
|Part. No. :||RPLDIAR-A2M6|
Questions on RPLIDAR A2M6 - 360 Degree Laser Scanner
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).