330020 Sabertooth dual 2x25A V2 motor driver

Sabertooth dual 2x25A V2 motor driver

Il Sabertooth 2x25 è uno dei driver motori più versatili, efficienti e semplici da usare esistenti sul mercato. E' adatto per il controllo di robot di una certa dimensione: fino a circa 45Kg per robot da combattimento e fino a 130Kg per robot ad utilizzo generico.
Categorie
Prezzi IVA inclusa
€ 124,20 Prezzo
€ 101,80 + VAT

 

Dettagli

The Sabertooth 2X25 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for high powered robots - up to 100lbs in combat or 300lbs for general purpose robotics. Out of the box, the Sabertooth can supply two DC brushed motors with up to 25A each. Peak currents of 50A per channel are achievable for a few seconds.  Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor. 

Sabertooth allows you to control two motors with: analog voltage, radio control, serial and packetized serial. You can build many different robots of increasing complexity for years to come with a Sabertooth. Sabertooth has independent and speed+direction operating modes, making it the ideal driver for differential drive (tank style) robots and more. The operating mode is set with the onboard DIP switches so there are no jumpers to lose. Sabertooth features screw terminal connectors - making it possible for you to build a robot without even soldering.  Sabertooth is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. Sabertooth also allows you to make very fast stops and reverses - giving your robot a quick and nimble edge.

Sabertooth has a built in 5V BEC that can provide power to a microcontroller or R/C receiver. The lithium cutoff mode allows Sabertooth to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available. Sabertooth's transistors are switched at ultrasonic speeds (32kHz) for silent operation.  Sabertooth 2X25 uses 1.3 milliohm MOSFETs in its bridge. Going by our competitor's ridiculous rating schemes this would make it a dual 190A motor driver! Use of our motor drivers with cheap AC adapters is not recommended. Use a battery or at least put a battery in parallel with a DC supply.

Product Specs

Model: Sabertooth 2X25
Specifications: 25A continuous, 50A peak per channel.
6-24V nominal, 30V absolute maximum 

Synchronous regenerative drive
Ultra-sonic switching frequency
Thermal and overcurrent protection
Lithium protection mode 

Input modes: Analog, R/C, simplified serial, packetized serial

Size: 2.6” x 3.2” x .8”
65 x 80 x 20 mm
Documentation: Sabertooth 2x25V2.doc (2.6mb) 
Sabertooth 2x25.doc (2.6mb) 
Sabertooth 2x25.pdf (1.9mb)
Quick start guide.doc
Quick start guide.pdf
Sabertooth DIP Switch Wizard
Motor driver efficiency comparison Sample RPM versus throttle graph
Applications: Combat robots up to 100lb
Normal and hobby robots up to 300lb
Differential drive robots
Electric vehicles, ride-on toys, scooters

Easy speed/direction control for pumps, conveyors, automation and any application that uses two brushed DC motors
Application notes: Using a SyRen/Sabertooth with an ATX (or similar) DC power supply

Packetized mode with a PIC and Sabertooth

Using Sabertooth with Roborealm

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Sabertooth dual 2x25A V2 motor driver

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Sabertooth 2X5 Controllo Motori DC 2X5A

    330018 Sabertooth 2X5 Controllo Motori DC 2X5A

    Modulo di potenza per il controllo di due motori a spazzole in corrente continua di media potenza (5...15A), vari sistemi di false
    Tasse escluse:
    € 47,90
    IVA inclusa:
    € 58,44
      Confronta
  2. Sabertooth 2X12 Motor Controller 2X12A

    330019 Sabertooth 2X12 Motor Controller 2X12A

    The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market.
    Tasse escluse:
    € 62,30
    IVA inclusa:
    € 76,01
      Confronta
  3. Sabertooth dual 32A motor driver

    330026 Sabertooth dual 32A motor driver

    Sabertooth 2x32 is a dual channel motor driver capable of supplying 32 amps to two motors, with peak currents up to 64 amps pfalse
    Tasse escluse:
    € 101,80
    IVA inclusa:
    € 124,20
      Confronta
  4. Kangaroo x2 motion controller

    330027 Kangaroo x2 motion controller

    Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It can be used with quadraturefalse
    Tasse escluse:
    € 19,80
    IVA inclusa:
    € 24,16
      Confronta
  5. Sabertooth dual 60A motor driver

    808714 Sabertooth dual 60A motor driver

    Sabertooth 2x60 can supply two DC brushed motors with up to 60A each. Peak currents of 120A per channel are achievable for a false
    Tasse escluse:
    € 149,60
    IVA inclusa:
    € 182,51
      Confronta