Dettagli
LED matrices are getting more powerful with each passing year requiring you to need a more powerful board to control them. That’s where this shield comes into play! The SmartLED Shield V4 is the next iteration of the SmartMatrix Shield and provides you with a bridge for your Teensy 3.1, 3.2, 3.5, or 3.6 to your large LED matrix. The shield makes it easy to connect the 13 signals required to drive the display, connects an external 5V supply to power the display and Teensy, and brings out the Teensy’s free signals to a convenient header.
Of course, if using an LED matrix isn’t your cup of tea, that’s just fine since the SmartLED Shield is also capable of driving individual APA102 LEDs, boards, and strips. The SmartLED Shield comes fully assembled, allows for your Teensy board to be removed at your leisure, and all the while saving four GPIO pins from the Teensy itself.
Note: The SmartLED Shield V4 is not compatible with the Teensy LC models.
- SmartLED Shield V4
- Male 4-pin JST SM Cable (10cm)
- 2x8 Extra Long Pin Header
Specifiche
Part. No. : | DEV-15046 |
Questions on SmartLED Shield V4 for Teensy
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
808443 Teensy 3.2
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse -
808783 Teensy 3.5
Version 3.5 features a 32 bit 120 MHz ARM Cortex-M4 processor with floating point unit. All digital pins are 5 volt tolerant.false -
808784 Teensy 3.6
Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 vfalse -
809290 Teensy 3.6 with Header Pins
Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 vfalse