201101 16x Isolated Solid State Relay Phidget

16x Isolated Solid State Relay Phidget

Per applicazioni che richiedono molti output, questo modulo e' l'ideale. 16 Uscite con rele a stato solido, PWM enabled.
Prezzi IVA inclusa
€ 64,05 Prezzo
€ 52,50 + VAT

 

Dettagli

For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, it can be used to control devices and switch circuits of up to 30V volts and 8 amps. LED strips, DC motors, power relays, fans and other small circuits are all common loads for this type of output. The REL1101 connects to a port on a VINT Hub. See the Connection & Compatibility tab for a list of hubs.

Externally Powered

Instead of providing power to the device, a solid state relay output switches the circuit to ground and completes the circuit when you want to switch it on. The power is supplied externally and should be connected in series with the load and the relay output. Each channel has a ground terminal beside it to make wiring a snap, and each one leads to a common ground.

PWM Switching

In addition to switching at microsecond speeds, each relay output is also capable of pulse-width modulation; rather than simply switching on or off, you can select a percentage duty cycle to limit the power being supplied to a specific level. This allows you to control devices like a dimmer would, which is an important feature for LEDs, fans, and motors. Check the datasheet for your device to ensure that it is designed to be used with PWM (some devices such as incandescent or CF bulbs are not designed for dimming).

Isolated for Stability

The VINT port on this board is electrically isolated from the rest of the board, improving stability by eliminating ground loops.

Product Specifications

Board Properties
Controlled By VINT
Current Consumption Min 4 mA
Current Consumption Max 45 mA
Relay Properties
Number of Relays 16
Contact Resistance Max 35 mΩ
Turn-off Time Max 100 ns
Switch Type Low Side MOSFET Switch
Turn-on Time Max 100 ns
PWM Frequency Max 28.5 kHz
PWM Resolution 0.5 %
Electrical Properties
Load Current Max (DC) 8 A
Load Voltage Max (DC) 30 V DC
Switching Power Max (Real) * 240 W
Physical Properties
Recommended Wire Size 16 - 26 AWG
Operating Temperature Min -40 °C
Operating Temperature Max 85 °C

* Note: At switching powers powers higher than 50W, external cooling may be required. For high power applications, a hockey-puck style SSR may be more appropriate. See the "Other Relays" tab for more details.

User Guide

Specifiche

Part. No. : REL1101
Interfaccia : I/O

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 16x Isolated Solid State Relay Phidget

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 3002 - Phidget Cable 60cm

    193002 3002 - Phidget Cable 60cm

    Cavo Phidgets per connettere il sistema VINT
    Tasse escluse:
    € 3,10
    IVA inclusa:
    € 3,78
      Confronta
  2. 3004 - Phidget Cable 350cm

    193004 3004 - Phidget Cable 350cm

    Cavo Phidgets per connettere il sistema VINT
    Tasse escluse:
    € 4,20
    IVA inclusa:
    € 5,12
      Confronta
  3. VINT Hub Phidget

    199000 VINT Hub Phidget

    The core of our product line, the USB VINT Hub has 6 VINT ports allowing for endless possibilities for USB sensing and control.
    Tasse escluse:
    € 29,00
    IVA inclusa:
    € 35,38
      Confronta
  4. 3003 - Phidget Cable 10cm

    193003 3003 - Phidget Cable 10cm

    Cavo Phidgets per connettere il sistema VINT
    Tasse escluse:
    € 2,10
    IVA inclusa:
    € 2,56
      Confronta
  5. Solid State Relay Phidget

    201022 Solid State Relay Phidget

    Modulo del sistema VINT che consiste in un rele' a stato solido con 10A di potenza sia AC che DC, Ideale per controllare carifalse
    Tasse escluse:
    € 16,80
    IVA inclusa:
    € 20,50
      Confronta
  6. 4x Relay Phidget

    201100 4x Relay Phidget

    Modulo a 4 Rele' della serie VINT. Alimentazione esterna isolata dal bus VINT. Si connette ad un HUB Vint.
    Tasse escluse:
    € 31,50
    IVA inclusa:
    € 38,43
      Confronta