714072 SparkFun 16x2 SerLCD - Black on RGB 3.3V

SparkFun 16x2 SerLCD - Black on RGB 3.3V

Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 16x2 a qualsiasi progetto. Interfacciabile con: I2C, SPI, UART
Categorie
Prezzi IVA inclusa
€ 26,17 Prezzo
€ 21,45 + VAT

 

Dettagli

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We’ve seriously overhauled the PCB design on the back of the screen by including an ATMega328P that handles all of the screen control, meaning a backpack is no longer needed! This display can now accept three different types of commands: serial, I2C, and SPI. This simplifies the number of wires needed and allows your project to display all kinds of text and numbers.

The on-board ATMega328P AVR microcontroller utilizes 11.0592 MHz crystal for greater communication accuracy with adjustable baud rates of 1200 through 1000000 but is default set at 9600. The firmware for this SerLCD is fully opensource and allows for any customizations you may need.

Note: Since the SerLCD is a 3.3V device, please make sure you convert to 3.3V logic depending on your chosen microcontroller or single board computer. Otherwise, you may risk damaging your board.

GET STARTED WITH THE SPARKFUN SERLCD GUIDE

  • 16x2, Black on RGB Display
  • The AVR ATMega328p (with Arduino-compatible bootloader) is populated on the back of each LCD screen and handles all of the LCD control
  • Three communication options: Serial, I2C and SPI
  • Adjustable I2C address controlled via software special commands (0x72 default)
  • Emergency reset to factory settings (Jumper RX to GND on bootup)
  • Operational backspace character
  • Incoming buffer stores up to 80 characters
  • Pulse width modulation of backlight allows direct control of backlight brightness and current consumption
  • Pulse width modulation of contrast allows for software defined contrast amount.
  • User definable splash screen
  • Open-sourced firmware and Arduino-compatible bootloader enables updates via the Arduino IDE

Specifiche

Part. No. : LCD-14072

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun 16x2 SerLCD - Black on RGB 3.3V

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Serial Graphic LCD 160x128

    708884 Serial Graphic LCD 160x128

    This is a very large serial graphic LCD. The Serial Graphic LCD backpack is soldered to the 160x128 pixel “Huge” Graphic LCD false
    Tasse escluse:
    € 66,49
    IVA inclusa:
    € 81,12
      Confronta
  2. LCD05-16x2-Green - Display seriale/I2C 16x2 sfondo verde

    785002 LCD05-16x2-Green - Display seriale/I2C 16x2 sfondo verde

    Display a caratteri con interfaccia Seriale o I2C. Il prodotto include il display e il modulo di controllo. La modalità di pifalse
    Tasse escluse:
    € 19,55
    IVA inclusa:
    € 23,85
      Confronta
  3. LCD05-16x2-B Serial/I2C Display 16x2 - Blue Background

    785003 LCD05-16x2-B Serial/I2C Display 16x2 - Blue Background

    Display a caratteri con interfaccia Seriale o I2C. Il prodotto include il display e il modulo di controllo. La modalità di pifalse
    Tasse escluse:
    € 19,55
    IVA inclusa:
    € 23,85
      Confronta
  4. LCD05-20x4-Green Display seriale/I2C 20x4 sfondo verde

    785004 LCD05-20x4-Green Display seriale/I2C 20x4 sfondo verde

    Display a caratteri con interfaccia Seriale o I2C. Il prodotto include il display e il modulo di controllo. La modalità di pifalse
    Tasse escluse:
    € 27,82
    IVA inclusa:
    € 33,94
      Confronta
  5. LCD05-20x4-Blue - Display seriale/I2C 20x4 sfondo blu

    785005 LCD05-20x4-Blue - Display seriale/I2C 20x4 sfondo blu

    Display a caratteri con interfaccia Seriale o I2C. Il prodotto include il display e il modulo di controllo. La modalità di pifalse
    Tasse escluse:
    € 27,82
    IVA inclusa:
    € 33,94
      Confronta
  6. SparkFun 20x4 SerLCD - Black on RGB 3.3V

    714074 SparkFun 20x4 SerLCD - Black on RGB 3.3V

    Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 20x4 a qualsiasi profalse
    Tasse escluse:
    € 26,75
    IVA inclusa:
    € 32,64
      Confronta