714193 SparkFun Air Quality Breakout - CCS811

SparkFun Air Quality Breakout - CCS811

The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a wide range of Total Volatile Organic Compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels.
Categorie
Prezzi IVA inclusa
€ 26,17 Prezzo
€ 21,45 + VAT

 

Dettagli

The CCS811 Air Quality Breakout is a digital gas sensor solution that senses a wide range of Total Volatile Organic Compounds (TVOCs), including equivalent carbon dioxide (eCO2) and metal oxide (MOX) levels. VOCs are often categorized as pollutants and/or sensory irritants and can come from a variety of sources like construction materials (paint, carpet, etc.), machines (copiers, processors, etc.) and even people (breathing, smoking, etc.). This breakout is intended for indoor air quality monitoring in personal devices such as watches and phones, but we’ve put it on a breakout board so you can use it as a regular I2C device.

The onboard CCS811 supports multiple measurement modes that have been optimized for low-power consumption during an active sensor measurement and idle mode extending battery life in portable applications. We have broken out each necessary pin on the CCS811 as well as additional pins to add your own NTC Thermistor to determine the temperature of the CCS811’s surroundings, which can be used to help compensate the readings.

Note: Please be aware that the CCS811 datasheet recommends a burn-in of 48 hours and a run-in of 20 minutes (you must allow 20 minutes for the sensor to warm up and output valid data).

GET STARTED WITH THE CCS811 BREAKOUT GUIDE

Features:

  • Total Volatile Organic Compound (TVOC) sensing from 0 to 1,187 parts per billion
  • eCO2 sensing from 400 to 8,192 parts per million
  • Five Operating Modes
  • Integrated MCU
  • Onboard Processing
  • Standard I2C Digital Interface
  • Optimized Low-Power Modes
  • Optional NTC Thermistor Pins

Documents:

Specifiche

Part. No. : SEN-14193

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun Air Quality Breakout - CCS811

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Grove - Air quality sensor v1.3

    808441 Grove - Air quality sensor v1.3

    The sensor is designed for indoor air quality testing. The main gas detected is carbon monoxide, alcohol, acetone, thinner, ffalse
    Tasse escluse:
    € 9,43
    IVA inclusa:
    € 11,50
      Confronta
  2. Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2

    809148 Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2

    This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated outputfalse
    Tasse escluse:
    € 21,30
    IVA inclusa:
    € 25,99
      Confronta
  3. SparkFun Weather Shield

    713956 SparkFun Weather Shield

    The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidityfalse
    Tasse escluse:
    € 33,37
    IVA inclusa:
    € 40,71
      Confronta
  4. SparkFun RedBoard Edge

    714525 SparkFun RedBoard Edge

    Scheda Arduino compatibile, pronta per essere montata a pannello. Ha tutte le caratteristiche della scheda RedBoard con i confalse
    Tasse escluse:
    € 16,15
    IVA inclusa:
    € 19,70
      Confronta