Dettagli
The SparkFun AST-CAN485 I/O Shield allows you to use the AST-CAN485 Dev Board with 24VDC Inputs and Outputs, a popular voltage level for industrial automation devices as well as 5v devices. By providing screw terminals, the board can easily and safely interface with I/O in a semi-permanent manner which allows for inputs, outputs, or the board itself to be swapped out. With all pins pre-populated with either females pin headers or screw terminals, setup time is minimized.
The AST-CAN485 I/O Shield provides a socket to break out all of the I/O of the AST-CAN485 Dev Board. To make a secure connection to your industrial equipment, screw terminals come pre-soldered to the board to get you up and running in no time. The AST-CAN485 I/O Shield is designed to work in the industrial 24V environment, but has a wide supply input range of 7-24V. The board comes with input reverse voltage protection with a green and red status LEDs (green means power is connected properly, and red indicates reversed power, and blocks power to the rest of the board.
Note: This board has pins that operate at 24V as well as pins that operate at 5V. Care should be taken during wiring as 24V has the potential to do significant damage to 5V circuits.
- Toshiba TLP290-4 Logic Controller
- I/O and Power Pins broken out into both Female Headers and Screw Terminals
- Fully Populated, no soldering necessary
- 7-24VDC Input
- Schematic
- Eagle Files
- Hookup Guide
- CAN Bus
- CAN bus
- CAN 2.0 Specification (superseded by the ISO standard)
- ISO Standard
- CANopen
- DeviceNet
- RS485
- Arduino Board Manager
- Arduino Library
- GitHub
Specifiche
Part. No. : | DEV-14598 |
Interfaccia : | I/O |
Tensione : | 5 |
Tipo Shield : | Comunicazione |
Questions on SparkFun AST-CAN485 I/O Shield (24V)
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
713262 CAN-BUS Shield
This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and efalse -
120370 CAN BUS Shield For Arduino
This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNOfalse -
809047 USB-CAN Analyzer
Analizzatore di CAN BUS economico di alta qualita'. Semplice da usare, consente di comunicare con i dispositivi su CAN BUS cofalse -
809151 CAN-BUS Shield V2
CAN-BUS Shield which adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino/Seefalse -
714483 SparkFun AST-CAN485 Dev Board
The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the ufalse -
714597 SparkFun AST-CAN485 WiFi Shield
Shield WiFi con ESP8266, per la scheda AST-CAN485 Dev Board