Dettagli
If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1011 SparkFun Capacitive Touch Breakout offers a single, momentary capacitive touch button with easy-to-use digital I/O pins.
The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch. As long as a touch (e.g., from a finger) is detected, the AT42QT1011 keeps the output line high. Otherwise, the line is kept low. You just need to provide a power source (1.8V–5V) and ground for the AT42QT1011 to work. Additionally, a PAD pin is available if you would like to create your own external electrode.
Unlike its sibling, the AT42QT1011 does not have an internal time-out, meaning that if you hold your finger to the breakout’s pad for any length of time, it will stay on. The difference between the AT42QT1010 and the AT42QT1011 is small but may be a game changer depending on your project’s uses.
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (AT42QT1011)
- GitHub
Specifiche
Part. No. : | SEN-14520 |
Questions on SparkFun Capacitive Touch Breakout - AT42QT1011
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
115107 Grove - I2C Touch Sensor
Modulo Grove con 4 sensori touch -
511362 Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070 -
Modulo con 5 pads conduttivi dove collegare i punti di contatto. Non e' richiesto un microcontrollore per il funzionamento, ifalse -
511374 Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010
When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high. -
115227 Grove - Touch Sensor
Modulo con Touch Sensor -
712013 SparkFun Touch Shield
The MPR121QR2 IC is a great way to build simple capacitive touch interfaces, and now it’s even easier to incorporate into youfalse -
808302 Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121
This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacfalse