Dettagli
The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use an analog voltage to represent the temperature, the TMP102 uses the I2C bus of the Arduino to communicate the temperature. Needless to say, this is a very handy sensor that doesn’t require much setup.
The TMP102 is capable of reading temperatures to a resolution of 0.0625°C, and is accurate up to 0.5°C. The breakout has built-in 4.7kΩ pull-up resistors for I2C communications and runs from 1.4V to 3.6V. I2C communication uses an open drain signaling, so there is no need to use level shifting.
GET STARTED WITH THE TMP102 BREAKOUT GUIDE
Features:
- Uses the I2C interface
- 12-bit, 0.0625°C resolution
- Typical temperature accuracy of ±0.5°C
- 3.3V sensor
- Supports up to four TMP102 sensors on the I2C bus at a time
Documents:
Specifiche
Part. No. : | SEN-13314 |
Questions on SparkFun Digital Temperature Sensor Breakout - TMP102
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710167 Humidity and Temperature Sensor - RHT03
The RHT03 (also known by DHT-22) is a low cost humidity and temperature sensor with a single wire digital interface. -
711050 DS18B20 - Sensore di temperatura digitale waterproof
Sensore di temperatura digitale DS18B10 prodotto dalla Maxim, inglobato in contenitore a tenuta stagna, completo di cavo a 3 fili. -
710988 TMP36 - Sensore di temperatura analogico
Il TMP36 è un sensore di temperatura analogico molto economico e preciso, in formato TO-92. Fornisce un'uscita analogica linfalse -
709570 Termometro ad Infrarosso - MLX90614
Il termometro ad infrarosso MLX90614ESF-BAA - misura la temperatura senza bisogno di contatto. Un ADC a 17-bit e un potente Dfalse