715110 SparkFun ESP32 Thing Plus DMX to LED Shield

SparkFun ESP32 Thing Plus DMX to LED Shield

La scheda ESP32 Thing Plus DMX to LED Shield e' il sistema perfetto per inviare e ricevere segnali su protocollo DMX.
Categorie
Prezzi IVA inclusa
€ 26,17 Prezzo
€ 21,45 + VAT

 

Dettagli

The SparkFun ESP32 Thing Plus DMX to LED Shield is the perfect way to send and receive DMX data. Whether it's coming in via the onboard XLR-3 jack or ArtNet, or outputting over the XLR-3 Jack/ArtNet, this shield has you covered! It's the perfect way to get started developing your own custom DMX fixtures, or even adding ArtNet capabilities to a current fixture. It also holds up to the DMX standard which requires electrical isolation between the controller and communication side to avoid ground loops.

The DMX to LED Shield can be powered either through the screw terminals or the USB connection from your microcontroller that's plugged into the shield. The screw terminal is a 2-pin 3.5 mm screw terminal capable of accepting 26-16 AWG wire with a strip length of ~5-6mm. Please note that you should always power the shield with 5V to provide proper power for RS485.

The outputs are broken out to poke home connectors ordered to match up with APA102 LED strips and LuMini devices. The DMX to LED shield is designed to work with the SparkFun Thing Plus - ESP32 WROOM or any board with a Feather footprint, so Feathers and Feather-Wings will fit it. Since many Feather boards are 3.3V logic, there is a logic level converter between the microcontroller and LED data pins to bring the poke home connectors up to 5V logic.

 

 

  • Sizing (approx): 2.625 (L) x 2.7 (W) x 1.375 (H)
  • 3 mounting holes for 4-40 screws
  • Populated female headers for the ESP32 Thing Plus to interface to
  • Screw terminal for 5VDC power input
    • Compatible with 26-16 AWG wire
  • 3-Pin XLR connections
    • XLR-3 female connector
    • XLR-3 male connector
  • Poke-home connector allows for sturdy but temporary addressable LED connection without soldering
    • Compatible with 24-18 AWG wire
  • Optocouplers for power isolation
    • Common Mode Rejection (CMR) at 1000V/ μs
  • 5V DC-DC converter with isolation for ground loops
    • Output: 5V at 200 mA
    • Isolation voltage of 1 kVDC (1 min.)
    • Isolation resistance of 1 GΩ
  • 3.3 V to 5 V Logic converters between LED poke-home connectors and Feather headers

Specifiche

Part. No. : DEV-15110

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun ESP32 Thing Plus DMX to LED Shield

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. WT8266-S1 FCC/CE/RoHS/ Wi-Fi Module based on ESP8266

    808466 WT8266-S1 FCC/CE/RoHS/ Wi-Fi Module based on ESP8266

    WT8266-S1 FCC/CE/RoHS/ Wi-Fi Module based on ESP8266 is a low consumption, high performance embedded Wi-Fi network control mofalse
    Tasse escluse:
    € 9,98
    IVA inclusa:
    € 12,18
      Confronta
  2. Adafruit HUZZAH ESP8266 Breakout

    808476 Adafruit HUZZAH ESP8266 Breakout

    Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like!
    Tasse escluse:
    € 10,79
    IVA inclusa:
    € 13,16
      Confronta
  3. SparkFun ESP8266 Thing - Dev Board

    713711 SparkFun ESP8266 Thing - Dev Board

    This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an infalse
    Tasse escluse:
    € 12,84
    IVA inclusa:
    € 15,66
      Confronta
  4. Adafruit Feather HUZZAH with ESP8266 WiFi

    808585 Adafruit Feather HUZZAH with ESP8266 WiFi

    This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB anfalse
    Tasse escluse:
    € 19,25
    IVA inclusa:
    € 23,49
      Confronta
  5. SparkFun Blynk Board - ESP8266

    713794 SparkFun Blynk Board - ESP8266

    Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB cfalse
    Tasse escluse:
    € 30,72
    IVA inclusa:
    € 37,48
      Confronta
  6. SparkFun nRF52832 Breakout

    713990 SparkFun nRF52832 Breakout

    It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flasfalse
    Tasse escluse:
    € 16,15
    IVA inclusa:
    € 19,70
      Confronta
  7. ESP-WROOM-32  Wi-Fi and Bluetooth  radio

    808888 ESP-WROOM-32 Wi-Fi and Bluetooth radio

    SMD module which you can integrate to your own PCB design. Espressif has took care for all certifications and regulations so false
    Tasse escluse:
    € 6,50
    IVA inclusa:
    € 7,93
      Confronta
  8. ESP32-CoreBoard  ESP32 WiFi/BLE development board

    808889 ESP32-CoreBoard ESP32 WiFi/BLE development board

    ESP32-CoreBoard is easy to prototype development board for the new ESP32 SoC from Espressif, it has dual header pins with 0.1false
    Tasse escluse:
    € 17,00
    IVA inclusa:
    € 20,74
      Confronta
  9. ESP32 Breakout Kit

    808962 ESP32 Breakout Kit

    This is the breakout kit specially made for ESP32, it contains a breakout board and some pin headers.
    Tasse escluse:
    € 4,02
    IVA inclusa:
    € 4,90
      Confronta
  10. SparkFun ESP32 Thing Power Control Shield

    714155 SparkFun ESP32 Thing Power Control Shield

    The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variefalse
    Tasse escluse:
    € 26,75
    IVA inclusa:
    € 32,64
      Confronta
  11. ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    809014 ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, WiFi, Remote control IR, and CAN connectivity.
    Tasse escluse:
    € 26,00
    IVA inclusa:
    € 31,72
      Confronta
  12. ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    809015 ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, and WiFi.
    Tasse escluse:
    € 22,00
    IVA inclusa:
    € 26,84
      Confronta
  13. ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD

    809249 ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD

    Scheda per Riconoscimento Vocale sviluppata da Espressif. Include un modulo ESP32-WROOM32
    Tasse escluse:
    € 24,60
    IVA inclusa:
    € 30,01
      Confronta
  14. ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM

    809280 ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM

    Scheda basata sul chip ESP32 con un microcontrollore PIC32MX270F256DT, una potente soluzione IOT con la proverbiale affidabilfalse
    Tasse escluse:
    € 18,00
    IVA inclusa:
    € 21,96
      Confronta
  15. ESP-EYE EMBEDDED CAMERA WITH AI

    510053 ESP-EYE EMBEDDED CAMERA WITH AI

    Scheda che combina un modulo WiFi ESP32 e un modulo ESP-WHO per il Riconoscimento Faccial, implementa tecnologia AI
    Tasse escluse:
    € 28,00
    IVA inclusa:
    € 34,16
      Confronta
  16. USB-RS485B - Low cost DMX512 Transmitter

    809499 USB-RS485B - Low cost DMX512 Transmitter

    Interfaccia USB to RS485 funzionante a qualsiasi baud rate fino a 250k baud. Fino a 128 dispositivi sul bus. Puo' essere usatfalse
    Tasse escluse:
    € 19,83
    IVA inclusa:
    € 24,19
      Confronta