714155 SparkFun ESP32 Thing Power Control Shield

SparkFun ESP32 Thing Power Control Shield

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project!
Categorie
Prezzi IVA inclusa
€ 32,64 Prezzo
€ 26,75 + VAT

Qty
 

Dettagli

The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! With a default voltage range of 5–28VDC, power can be connected to this shield in one of two ways. The first is the barrel connector, but with a maximum current rating of 2.5A (designed for light loads). The second option is on the 3-pin screw terminal, which has connections for VCC, ground and a 5V output. The supply voltage is regulated down to 5V to power the ESP32 Thing, as well as a fan to keep the board cool under heavy loads.

At the heart of the board are three MC33926 motor drivers by NXP Semiconductors. While the board is theoretically capable of switching up to 30A total, the power traces in the board and connectors have only been tested up to 10A total across the six output pins. Along with switching DC loads on and off, the MC33926 has three built-in current sensors, which are connected to output pins 2, 4 and 6. Each of the current sensors is connected to an LMV358 operational amplifier to adjust the gain of each current measurement.

Due to a drawback with the MC33926 only possessing one current sensor per driver, we’ve added a feature to the Power Control Shield for loads smaller than 5A. For smaller loads, clearing the solder jumper and soldering in the appropriate feedback resistors can maximize the sensitivity of the 12-bit analog-to-digital converter (ADC) built into the ESP32 Thing. We have a full table written in our Hookup Guide below.

Note: This product only includes the SparkFun ESP32 Thing Power Control Shield. The ESP32 Thing, headers and optional thermal gap filler will need to be purchased separately.

GET STARTED WITH THE ESP32 POWER SHIELD GUIDE

Documents:

Specifiche

Part. No. : DEV-14155

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun ESP32 Thing Power Control Shield

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit HUZZAH ESP8266 Breakout

    808476 Adafruit HUZZAH ESP8266 Breakout

    Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like!
    Tasse escluse:
    € 10,79
    IVA inclusa:
    € 13,16
      Confronta
  2. SparkFun ESP8266 Thing - Dev Board

    713711 SparkFun ESP8266 Thing - Dev Board

    This is the SparkFun ESP8266 Thing Dev Board – a development board that has been solely design around the ESP8266, with an infalse
    Tasse escluse:
    € 12,84
    IVA inclusa:
    € 15,66
      Confronta
  3. Adafruit Feather HUZZAH with ESP8266 WiFi

    808585 Adafruit Feather HUZZAH with ESP8266 WiFi

    This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB anfalse
    Tasse escluse:
    € 19,25
    IVA inclusa:
    € 23,49
      Confronta
  4. SparkFun Blynk Board - ESP8266

    713794 SparkFun Blynk Board - ESP8266

    Blynk is an easy to use app builder that allows users to add a variety of buttons, sliders, graphical displays and even RGB cfalse
    Tasse escluse:
    € 30,72
    IVA inclusa:
    € 37,48
      Confronta
  5. SparkFun ESP32 Thing

    713907 SparkFun ESP32 Thing

    Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLEfalse
    Tasse escluse:
    € 20,45
    IVA inclusa:
    € 24,95
      Confronta
  6. SparkFun nRF52832 Breakout

    713990 SparkFun nRF52832 Breakout

    It’s half microcontroller, with a list of features including 32 configurable I/O pins, SPI, I2C, UART, PWM, ADC’s, 512kB flasfalse
    Tasse escluse:
    € 16,15
    IVA inclusa:
    € 19,70
      Confronta
  7. ESP-WROOM-32  Wi-Fi and Bluetooth  radio

    808888 ESP-WROOM-32 Wi-Fi and Bluetooth radio

    SMD module which you can integrate to your own PCB design. Espressif has took care for all certifications and regulations so false
    Tasse escluse:
    € 6,50
    IVA inclusa:
    € 7,93
      Confronta
  8. ESP32-CoreBoard  ESP32 WiFi/BLE development board

    808889 ESP32-CoreBoard ESP32 WiFi/BLE development board

    ESP32-CoreBoard is easy to prototype development board for the new ESP32 SoC from Espressif, it has dual header pins with 0.1false
    Tasse escluse:
    € 17,00
    IVA inclusa:
    € 20,74
      Confronta
  9. Assembled Adafruit Feather HUZZAH with ESP8266 WiFi With Headers

    808914 Assembled Adafruit Feather HUZZAH with ESP8266 WiFi With Headers

    This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB anfalse
    Tasse escluse:
    € 20,25
    IVA inclusa:
    € 24,71
      Confronta
  10. ESP32 Breakout Kit

    808962 ESP32 Breakout Kit

    This is the breakout kit specially made for ESP32, it contains a breakout board and some pin headers.
    Tasse escluse:
    € 4,02
    IVA inclusa:
    € 4,90
      Confronta
  11. ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    809014 ESP32-EVB DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, WiFi, Remote control IR, and CAN connectivity.
    Tasse escluse:
    € 26,00
    IVA inclusa:
    € 31,72
      Confronta
  12. ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    809015 ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET

    This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, and WiFi.
    Tasse escluse:
    € 22,00
    IVA inclusa:
    € 26,84
      Confronta
  13. SparkFun ESP32 Thing Motion Shield

    714430 SparkFun ESP32 Thing Motion Shield

    The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield’s ofalse
    Tasse escluse:
    € 20,12
    IVA inclusa:
    € 24,55
      Confronta
  14. ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD

    809249 ESP32-LyraT - SPEECH RECOGNITION DEVELOPMENT BOARD

    Scheda per Riconoscimento Vocale sviluppata da Espressif. Include un modulo ESP32-WROOM32
    Tasse escluse:
    € 24,60
    IVA inclusa:
    € 30,01
      Confronta
  15. ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM

    809280 ESP32-PRO - ESP32 board with 32Mbit SPI Flash 32Mbit PSRAM

    Scheda basata sul chip ESP32 con un microcontrollore PIC32MX270F256DT, una potente soluzione IOT con la proverbiale affidabilfalse
    Tasse escluse:
    € 18,00
    IVA inclusa:
    € 21,96
      Confronta
  16. SparkFun WiFi IR Blaster (ESP8266)

    715031 SparkFun WiFi IR Blaster (ESP8266)

    The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. With the Motion Shield’s ofalse
    Tasse escluse:
    € 20,12
    IVA inclusa:
    € 24,55
      Confronta
  17. ESP-EYE EMBEDDED CAMERA WITH AI

    510053 ESP-EYE EMBEDDED CAMERA WITH AI

    Scheda che combina un modulo WiFi ESP32 e un modulo ESP-WHO per il Riconoscimento Faccial, implementa tecnologia AI
    Tasse escluse:
    € 28,00
    IVA inclusa:
    € 34,16
      Confronta
  18. SparkFun ESP32 Thing Plus DMX to LED Shield

    715110 SparkFun ESP32 Thing Plus DMX to LED Shield

    La scheda ESP32 Thing Plus DMX to LED Shield e' il sistema perfetto per inviare e ricevere segnali su protocollo DMX.
    Tasse escluse:
    € 21,45
    IVA inclusa:
    € 26,17
      Confronta
  19. SparkFun Thing Plus - ESP32 WROOM

    714689 SparkFun Thing Plus - ESP32 WROOM

    La scheda SparkFun ESP32 Thing Plus e' il passo successivo per iniziare con il chip Espressif continuando ad usufruire di tutfalse
    Tasse escluse:
    € 20,12
    IVA inclusa:
    € 24,55
      Confronta