714414 SparkFun GPS Breakout - XA1110 (Qwiic)

SparkFun GPS Breakout - XA1110 (Qwiic)

Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial ports simultaneously.
Prezzi IVA inclusa
€ 47,82 Prezzo
€ 39,20 + VAT

Qty
 

Dettagli

The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chipset, loaded with specialized SparkFun firmware that enables both I2C and serial ports simultaneously. Using I2C means you won’t have to tie up your serial port with GPS, leaving it open to other possibilities.

This GPS Breakout supports up to 210 PRN channels with 99 search channels and 33 simultaneous tracking channels. With support of GPS, GLONASS, QZSS, SBAS and more, the onboard XA1110 can provide even more accurate positioning in multiple locations. Additionally, the XA1110 GPS Breakout is configured with an onboard RTC battery that enables a warm-start functionality, giving the X1 just five seconds to first fix, as well as a U.FL connector that provides you the option to hook up an external antenna via a U.FL cable.


The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.


GET STARTED WITH THE SPARKFUN XA1110 GPS BREAKOUT GUIDE

 

  • 33 tracking/99 acquisition-channel GPS +GLONASS receiver
  • Supports QZSS & SBAS (WAAS, EGNOS, MSAS, GAGAN)
  • Sensitivity: -165dBm
  • Update Rate: up to 10Hz
  • 12 multi-tone active interference canceler
  • 2x Qwiic connectors
  • U.FL connector
  • Onboard RTC battery
  • Specifiche

    Part. No. : GPS-14414
    Interfaccia : I/O, I2C
    Tensione : 5
    Tipo Shield : Sensori

    Tags prodotto

    Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

    Questions on SparkFun GPS Breakout - XA1110 (Qwiic)

    No questions asked yet

    Fai una domanda (Registrati oppure Esegui il Login ).
    Fai una domanda (Registrati oppure Esegui il Login ).
    1. SparkFun Qwiic Shield for Arduino

      714352 SparkFun Qwiic Shield for Arduino

      The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System witfalse
      Tasse escluse:
      € 5,00
      IVA inclusa:
      € 6,10
        Confronta
    2. Qwiic Cable - Breadboard Jumper (4-pin)

      714425 Qwiic Cable - Breadboard Jumper (4-pin)

      This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookupfalse
      Tasse escluse:
      € 1,70
      IVA inclusa:
      € 2,07
        Confronta
    3. Qwiic Cable - 500mm

      714429 Qwiic Cable - 500mm

      This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse
      Tasse escluse:
      € 2,20
      IVA inclusa:
      € 2,68
        Confronta
    4. Qwiic Cable - 100mm

      714427 Qwiic Cable - 100mm

      This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bfalse
      Tasse escluse:
      € 2,00
      IVA inclusa:
      € 2,44
        Confronta
    5. Qwiic Cable - 200mm

      714428 Qwiic Cable - 200mm

      This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bfalse
      Tasse escluse:
      € 2,00
      IVA inclusa:
      € 2,44
        Confronta
    6. Qwiic Cable - 50mm

      714426 Qwiic Cable - 50mm

      This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together bufalse
      Tasse escluse:
      € 1,20
      IVA inclusa:
      € 1,46
        Confronta
    7. Qwiic JST Connector - SMD 4-pin

      714417 Qwiic JST Connector - SMD 4-pin

      Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to creafalse
      Tasse escluse:
      € 0,90
      IVA inclusa:
      € 1,10
        Confronta

    Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

    Price Match



    * Campi richiesti

    Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

    Grazie per la tua fiducia in Robot Italy!