715242 SparkFun Qwiic Scale - NAU7802

SparkFun Qwiic Scale - NAU7802

Modulo per interfacciare celle di carico per ottenere accurate misure di peso. Utilizza l'integrato NAU7802
Prezzi IVA inclusa
€ 21,59 Prezzo
€ 17,70 + VAT

 

Dettagli

 

The SparkFun Qwiic Scale is a small breakout board for the NAU7802 that allows you to easily read load cells to accurately measure the weight of an object. By connecting the board to your microcontroller you will be able to read the changes in the resistance of a load cell and, with some calibration, you'll be able to get very accurate weight measurements. This can be handy for creating your own industrial scale, process control or simple presence detection. Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.

By connecting a load cell to the Qwiic Scale you will be able to translate sensor data into something your microcontroller can read. The NAU7802 is an ADC with built in gain and I2C output to amplify and convert the readings from a standard load cell. A load cell is basically a device that translates pressure or force into electrical signals. In most cases this signal is very small and needs to be amplified. There are many popular chips that read the change and amplify it, but the NAU7802 goes one step further and converts everything to a true I2C output (attached to a Qwiic connector).

The board provides a four spring terminal to connect your load cell with no soldering required. In addition to the I2C pins, the board also breaks out an interrupt pin and AVDD to the edge of the board. The differential input signals (plus a second set of input signals) are broken out to the middle of the board, as well.

NOTE: The I2C address of the NAU7802 is 0x2A and is hardware defined. A multiplexer/Mux is required to communicate to multiple NAU7802 sensors on a single bus. If you need to use more than one NAU7802 sensor consider using the Qwiic Mux Breakout.


The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

The NAU7802 Qwiic Scale can also be automatically detected, scanned, configured, and logged using the OpenLog Artemis datalogger system. No programming, soldering, or setup required!

 

  • Operating Voltage: 3.3V (NAU7802: 2.7V-5.5V)
  • 24-bit Dual-Channel Analog to Digital Converter
  • Programmable Gain Amplifier
  • On-chip temperature sensor
  • Simultaneous 50Hz and 60Hz rejection
  • Programmable PGA gains from 1 to 128
  • Programmable aDC data output rates
  • External differential reference voltage range from 0.1V to 5V
  • Low Power Consumption and Programmable Power Management Options
    • <1uA standby current
  • 2x Qwiic Connectors


Specifiche

Part. No. : SEN-15242
Interfaccia : n/a

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun Qwiic Scale - NAU7802

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. 3133 - Cella di carico (0-5kg) - CZL635

    193133 3133 - Cella di carico (0-5kg) - CZL635

    Cella di carico a ponte di Wheatstone per pesi da 0 a 5Kg. Le celle di carico sono sensori studiati per misurare forze applicfalse
    Tasse escluse:
    € 8,69
    IVA inclusa:
    € 10,60
      Confronta
  2. 3132 - Cella di carico (0-780g) - CZL616C

    193132 3132 - Cella di carico (0-780g) - CZL616C

    Cella di carico a ponte di Wheatstone per pesi da 0 a 780g. Le celle di carico sono sensori studiati per misurare forze applifalse
    Tasse escluse:
    € 7,44
    IVA inclusa:
    € 9,08
      Confronta
  3. 3138 - Cella di carico a S (0-100Kg) - CZL301C

    193138 3138 - Cella di carico a S (0-100Kg) - CZL301C

    Cella di carico a S, a ponte di Wheatstone per pesi da 0 a 100Kg. Le celle di carico sono sensori studiati per misurare forzefalse
    Tasse escluse:
    € 55,77
    IVA inclusa:
    € 68,04
      Confronta
  4. 3141 - Button Load Cell (0-1000kg) - CZL204

    193141 3141 - Button Load Cell (0-1000kg) - CZL204

    Cella di carico a ponte di Wheatstone. Le celle di carico sono sensori studiati per misurare forze applicate in un'unica direfalse
    Tasse escluse:
    € 61,98
    IVA inclusa:
    € 75,62
      Confronta
  5. Load Cell - 50kg, Disc (TAS606)

    713331 Load Cell - 50kg, Disc (TAS606)

    This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical false
    Tasse escluse:
    € 63,84
    IVA inclusa:
    € 77,88
      Confronta
  6. Load Cell - 200kg, Disc (TAS606)

    713332 Load Cell - 200kg, Disc (TAS606)

    This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrfalse
    Tasse escluse:
    € 63,84
    IVA inclusa:
    € 77,88
      Confronta
  7. SparkFun Snappable Protoboard

    713268 SparkFun Snappable Protoboard

    he SparkFun Snappable Protoboard is a large PCB crisscrossed with v-scored lines so that you can choose just how long and widfalse
    Tasse escluse:
    € 7,54
    IVA inclusa:
    € 9,20
      Confronta
  8. SparkFun Load Cell Amplifier - HX711

    713879 SparkFun Load Cell Amplifier - HX711

    The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measfalse
    Tasse escluse:
    € 9,00
    IVA inclusa:
    € 10,98
      Confronta
  9. SparkFun OpenScale

    713261 SparkFun OpenScale

    The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature.
    Tasse escluse:
    € 29,40
    IVA inclusa:
    € 35,87
      Confronta
  10. Load Cell - 200kg, S-Type (TAS501)

    714282 Load Cell - 200kg, S-Type (TAS501)

    This S-Type load cell (sometimes called a strain gauge) can translate up to 200kg of pressure (force) into an electrical signal.
    Tasse escluse:
    € 63,84
    IVA inclusa:
    € 77,88
      Confronta