715123 SparkFun RedBoard Qwiic

SparkFun RedBoard Qwiic

La famosa RedBoard nella recente versione dotata di connettori Qwiic, compatibile con Arduino UNO
Prezzi IVA inclusa
€ 21,31 Prezzo
€ 17,47 + VAT



At SparkFun we continually like to innovate, update, and improve even when it comes to our very own development boards. We have multiple versions of the SparkFun RedBoard in our catalog but none of them in an R3 form factor with a Qwiic connector on it to make I2C easy… until now! The SparkFun RedBoard Qwiic is an Arduino-compatible development board that uses a few of the features that we have loved about Arduinos of the past while also incorporating a few key improvements over the original RedBoard. The best part about the RedBoard Qwiic is that (as the name implies) it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!

Of course, we didn’t just add a Qwiic Connector to the board, lets go over all the new additions that make the SparkFun RedBoard Qwiic unique! With the improved AP2112 voltage regulator, this Reboard gains a more robust 3.3V regulator that provides it more power to daisy chain multiple Qwiic boards and sensors, sourcing up to 600mA of current. To help support the micro USB connector (updated from a Mini USB), the CH340C Serial-USB converter IC allows the RedBoard Qwiic should reduce the need for you to manually install drivers allowing for newer operating systems to automatically recognize and install the drivers for the board. Lastly, we have made sure to add a few solder jumpers to the board. The jumpers for the A4 and A5 pins are tied directly to the I2C bus and can be used to disconnect the logic level converters from the pins while the voltage level jumpers can switch the RedBoard Qwiic from a 3.3V device to a 5V device (no logic level converter needed).

The SparkFun RedBoard Qwiic can be programmed over a USB Micro-B cable using the Arduino IDE: Just plug in the board, select “Arduino UNO” from the board menu and you’re ready to upload code. RedBoard Qwiic has all of the hardware peripherals you know and love: 20 Digital I/O pins with 6 PWM pins, UART, SPI and external interrupts. We’ve also broken out the SDA, SCL and IOREF pins that showed up on the UNO R3, so the RedBoard Qwiic will be compatible with future shields (if you choose to use them). You can power the SparkFun RedBoard Qwiic over USB or through the barrel jack. The on-board power regulator can handle anything from 7 to 15VDC. Check out the related items below for a compatible wall-wart power supply.

The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.



  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • CH340C Serial-USB Converter
  • AP2112 Voltage Regulator
  • A4/A5 Jumpers
  • 3.3V to 5V Voltage Level Jumper
  • Input voltage - 7-15V
  • 1 Qwiic Connector
  • 20 Digital I/O Pins (6 PWM Outputs and 6 Analog Inputs)
  • ISP Header
  • 32k Flash Memory
  • 16MHz Clock Speed
  • All SMD Construction
  • R3 Shield Compatible
  • Improved Reset Button


Part. No. : DEV-15123
Tensione : 3.3, 5

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on SparkFun RedBoard Qwiic

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Arduino UNO R3 con microcontrollore ATmega328

    500143 Arduino UNO R3 con microcontrollore ATmega328

    La nuova scheda Arduino Uno R3. Oltre a tutte le caratteristiche delle schede precedenti, la Uno ora utilizza un ATmega16U2 ifalse
    Tasse escluse:
    € 17,30
    IVA inclusa:
    € 21,11
  2. RedBoard - Programmed with Arduino

    712757 RedBoard - Programmed with Arduino

    Clone Arduino compatibile by Sparkfun. Simile all'arduino duemilanove ma con i connettori compatibili R3. Bootloader Arduino UNO.
    Prezzo di listino:
    € 19,70
    Tasse escluse:
    € 13,00
    IVA inclusa:
    € 15,86
  3. WhatsNext - Yellow (Arduino Uno Compatibile)

    809118 WhatsNext - Yellow (Arduino Uno Compatibile)

    Microcontroller board based on the the ATmega328. Arduino UNO compatible
    Tasse escluse:
    € 13,55
    IVA inclusa:
    € 16,53
  4. SparkFun RedBoard Edge

    714525 SparkFun RedBoard Edge

    Scheda Arduino compatibile, pronta per essere montata a pannello. Ha tutte le caratteristiche della scheda RedBoard con i confalse
    Tasse escluse:
    € 16,15
    IVA inclusa:
    € 19,70
  5. SparkFun BlackBoard C

    715098 SparkFun BlackBoard C

    La BlackBoard Sparkfun e' tutto quello di cui avete bisogno in un Arduino Uno, con molti Extra.
    Tasse escluse:
    € 20,05
    IVA inclusa:
    € 24,46
  6. SparkFun Qwiic Micro - SAMD21 Development Board

    715423 SparkFun Qwiic Micro - SAMD21 Development Board

    Scheda basata sul potentissimo microcontrollore ARM Cortex M0+, 32-bit clock fino a 48MHz. Arriva gia' pronto, con il bootloafalse
    Tasse escluse:
    € 18,90
    IVA inclusa:
    € 23,06
  7. SparkFun Qwiic Cable Kit

    715081 SparkFun Qwiic Cable Kit

    Set di cavi per il sistema Qwiic, utile da avere in laboratorio lavorando con schede, sensori e microcontrollori Qwiic
    Tasse escluse:
    € 8,40
    IVA inclusa:
    € 10,25
  8. USB 3.1 Cable A to C - 3 Foot

    714743 USB 3.1 Cable A to C - 3 Foot

    Cavo USB 3.1 di qualita', connettori USB A - USB C
    Tasse escluse:
    € 5,30
    IVA inclusa:
    € 6,47