Dettagli
The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and should auto install on most operating systems without the need for additional drivers. The Serial Basic uses the CH340G IC to quickly and easily convert serial signals to USB. It’s a great lower-cost alternative to the extremely popular FTDI Basic.
The pinout of the Serial Basic mimics the common DTR/RX/TX/VCC/CTS/GND pinout found on hundreds of FTDI-to-USB derivatives. It can also be used as a general serial device for debugging (such as with a GPS module). There is a jumper on the rear of the board that controls the output voltage on the VCC pin. By default, the board outputs 3.3V and has 3.3V signals. Changing this jumper to 5V will cause the board to output 5V on the VCC pin with 5V signals.
GET STARTED WITH THE SERIAL BASIC BREAKOUT GUIDE
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- Datasheet (CH340G)
- Drivers
- GitHub
Specifiche
Part. No. : | DEV-14050 |
Questions on SparkFun Serial Basic Breakout - CH340G
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
990004 Adattatore USB->Seriale in miniatura
L'adattatore seriale 990 004 e' ottimo per connettere microcontrollori e circuiti logici al PC. Il cuore del circuito e' il cfalsePrezzo di listino:€ 11,83OffertaTasse escluse:€ 8,20IVA inclusa:€ 10,00Prezzo IVA incl.
Confronta -
709716 FTDI Basic Breakout - 5V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more cfalse -
709873 FTDI Basic Breakout - 3.3V
This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more cfalse -
712935 FTDI SmartBasic
The FTDI SmartBasic is a variation on our classic FTDI Basic board which allows you to connect a second device to the hardwarfalse