Dettagli
Virtual reality is in, but you shouldn’t have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that’s where the SparkFun VR IMU Breakout comes in. At its heart is Bosch’s BNO080, a combination triple-axis accelerometer/gyro/magnetometer SiP, packaged with a 32-bit ARM Cortex M0+. The BNO080 Inertial Measurement Unit (IMU) produces accurate rotation vector headings, excellently suited for VR and other heading applications, with a static rotation error of two degrees or less. The VR IMU is exactly what we’ve been waiting for: All the sensor data is combined and drift-corrected into meaningful, accurate IMU information. It’s perfect for any project that needs to sense orientation or motion. This IMU breakout board has also been equipped with two I2C Qwiic connectors, in order to make interfacing with the tiny, QFN package a bit easier. It’s part of SparkFun’s Qwiic connect system, so you won’t have to do any soldering to figure out how things are oriented. However, we still have broken out 0.1"-spaced pins in case you prefer to use a breadboard.
The BNO080 was designed to be implemented in Android-based cellular phones to handle all the computations necessary for virtual reality goggles using only your phone. The sensor is quite powerful, and with power comes a complex interface. Thanks to the solder jumpers on the board, you will be able to select between two different I2C addresses, but if I2C is not your first communication choice, the sensor is capable of communicating over SPI and UART as well! We’ve also written an I2C-based library that provides the rotation vector (the reading most folks want from an IMU) as well as acceleration, gyro and magnetometer readings, step counting, activity classifier (such as riding a bike) and calibration.
The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.
Note: This is the same “High Precision” VR IMU that SparkX produced, not the original version that preceded it without the on-board 32kHz crystal.
- Operating Voltage: 1.65V - 3.6V
- I2C (Default): Up to 400kHz
- SPI: Up to 3MHz
- UART: 3Mbps
- Rotation Vector
- Dynamic Error: 3.5°
- Static Error: 2.0°
- Gaming Rotation Vector
- Dynamic Error: 2.5°
- Static Error: 1.5°
- Heading Drift: 0.5° / min
- Geomagnetic Rotation Vector
- Dynamic Rotation Error: 4.5°
- Static Rotation Error: 3.0°
- Gravity Angle Error: 1.5°
- Linear Acceleration Accuracy: 0.35m/s2
- Accelerometer Accuracy: 0.3m/s2
- Gyroscope Accuracy: 3.1° / sec
- Magnetometer Accuracy: 1.4µT
- 2x Qwiic Connection Ports
Specifiche
Part. No. : | SEN-14686 |
Questions on SparkFun VR IMU Breakout - BNO080 (Qwiic)
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710121 IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL345
This is a simple breakout for the ADXL345 accelerometer and the ITG-3200 gyro. With this board, you get a full 6 degrees of ffalse -
713762 SparkFun IMU Breakout - MPU-9250
The SparkFun MPU-9250 IMU Breakout features the latest 9-axis MEMS sensor from InvenSense. -
714001 SparkFun 9DoF Razor IMU M0
The SparkFun 9DoF Razor IMU M0 combines a SAMD21 microprocessor with an MPU-9250 9DoF (9 Degrees of Freedom) sensor to createfalse -
714589 SparkFun Differential I2C Breakout - PCA9615 (Qwiic)
Questa scheda rappresenta il modo piu' rapido e semplice per esterndere la portata del bus I2C. Il sistema differenzial consefalse -
714747 SparkFun Pi AVR Programmer HAT
Il Programmer HAT di Sparkfun rende semplice programmare gli AVR direttamente dalla porta SPI di un Raspberry Pi. -
715335 SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
IMU con 9DoF basato su chip ICM-20948 che utilizza il protocollo I2C. Convertitori di livello on board, accetta fino a 3.6V. false -
715081 SparkFun Qwiic Cable Kit
Set di cavi per il sistema Qwiic, utile da avere in laboratorio lavorando con schede, sensori e microcontrollori Qwiic -
714743 USB 3.1 Cable A to C - 3 Foot
Cavo USB 3.1 di qualita', connettori USB A - USB C