Dettagli
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x7 right-angle SMT), enough to connect your chosen Teensy in any configuration you need!
Note: This Header Kit can also be used for the Teensy 3.0 and 3.1, as the pin layout has not changed between the three versions.
- 2x 13-pin stackable header
- 1x 7-pin female header (for pins on end)
- 1x 3-pin header (for 3-off grid holes)
- 1x 2x7 right-angle SMT header, for the surface mount pads on the back of the Teensy 3.2
Specifiche
| Part. No. : | PRT-13925 |
Questions on Teensy Header Kit
Sort by
-
17/04/20 10.27 Buongiorno ultimamente ho acquistato da voi diversi kit come questo. Nella descrizione c'è scritto "2x 14-pin stackable header" ma in realtà tali header sono da 13 e non 14 pin.
Si è trattato di un errore? Come risolvo visto che mi servono per dei teensy 4 (sempre acquistati da voi)?
Grazie
Prodotti correlati
-
808421 Teensy LC
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.1 bringfalse -
808443 Teensy 3.2
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse -
714030 SparkFun Mini GPS Shield
The SparkFun Mini GPS Shield equips your Arduino Mini with access to a GPS module, µSD memory card socket and all of the othefalse
Prodotti Consigliati
Tasse escluse:
€ 53,28
IVA inclusa:
€ 65,00
|
|
ETH484-B - ETH484-B - 4 x 16A ethernet relay 
Tasse escluse:
€ 69,50
IVA inclusa:
€ 84,79
|
Nuovi prodotti
-
190001 VINT Hub Phidget
Tasse escluse:€ 32,00IVA inclusa:€ 39,04 -
191065 1065_1B - PhidgetMotorControl 1-...
Tasse escluse:€ 87,50IVA inclusa:€ 106,75
Area Clienti
Compara Prodotti
Non ci sono prodotti da comparare
Prodotti Simili
Dallo stesso Produttore
