808849 Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. That's why we are also carrying the new '850 model from Maxim - it's a "1-Wire" thermocouple amp which can have any number of breakouts on a single shared I/O line.
Categorie
Prezzi IVA inclusa
€ 19,54 Prezzo
€ 16,02 + VAT

 

Dettagli

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. So far we've carried the very nice MAX31855 which is an SPI interface thermocouple amplifier. The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. That's why we are also carrying the new '850 model from Maxim - it's a "1-Wire" thermocouple amp which can have any number of breakouts on a single shared I/O line.

The MAX31850K does everything for you, and can be easily interfaced with any microcontroller that has 1-Wire support. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors all assembled and tested. This board can be used with 'parasitic power' - where the power is on the data line - or with 'local power' where the power for the converter comes in on the Vin Pin.

Please note: this board does not have level shifting on the 3V Data line - we did this on purpose so that it can be used in parasitic mode. The data line must be level shifted to 3V - our 4-channel shifter works wonderfully for level shifting 1-Wire and you only need one at the '1-Wire host' for all thermocouples on the shared data line.

The MAX31850K data format is very similar to that of the well known 1-Wire DS18B20 temp sensor but it is not drop in compatible without code changes to check for the new '1 Wire family' type. We have adapted the classic Arduino OneWire and DallasTemp libraries to be MAX31850 compatible, so please click on those links to grab our libraries.

Comes with a 2 pin terminal block (for connecting to the thermocouple), 4.7K data line pullup resistor, and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple. Not for use with any other kind of thermocouple, K type only!

  • Works with any K type thermocouple
  • Will not work with any other kind of thermocouple other than K type
  • -270°C to +1370°C output in 0.25 degree increments
  • Internal temperature reading
  • 3.3 to 5v power supply. Data line is 3V only
  • 1-Wire interface allows any number of thermocouple amps on a single data line

Dimensions (without headers):20mm x 20mm

EagleCAD PCB files, Fritzing object, datasheets and more in the tutorial

Specifiche

Part. No. : 1727

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. MOD-TC - K-TYPE THERMOCOUPLE INTERFACE BOARD WITH MAX6675 AND UEXT

    500157 MOD-TC - K-TYPE THERMOCOUPLE INTERFACE BOARD WITH MAX6675 AND UEXT

    Questa scheda permette l'interfacciamento con termocoppie di tipo K attraverso il MAX6675. Permette una misurazione di temperfalse
    Tasse escluse:
    € 7,55
    IVA inclusa:
    € 9,21
      Confronta
  2. Thermocouple Type-K - Stainless Steel SEN-13715

    713715 Thermocouple Type-K - Stainless Steel SEN-13715

    This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, confalse
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  3. TMP4104 - K-Type Fiberglass Bead Probe Thermocouple (-40°C to +400°C)

    194104 TMP4104 - K-Type Fiberglass Bead Probe Thermocouple (-40°C to +400°C)

    The TMP4104 thermocouple can measure temperatures between -40°C to +400°C with a ±0.75°C accuracy.
    Tasse escluse:
    € 15,80
    IVA inclusa:
    € 19,28
      Confronta
  4. Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

    808836 Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865

    In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100.
    Tasse escluse:
    € 16,02
    IVA inclusa:
    € 19,54
      Confronta
  5. Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

    808837 Platinum RTD Sensor - PT100 - 3 Wire 1 meter long

    For precision temperature sensing, nothing beats a Platinum RTD
    Tasse escluse:
    € 12,85
    IVA inclusa:
    € 15,68
      Confronta
  6. Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865

    809081 Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865

    For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensfalse
    Tasse escluse:
    € 16,02
    IVA inclusa:
    € 19,54
      Confronta
  7. Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2

    809148 Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2

    This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated outputfalse
    Tasse escluse:
    € 21,30
    IVA inclusa:
    € 25,99
      Confronta
  8. SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable

    809291 SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable

    Sensore di Umidita'/temperatura, utilizza un Sensirion SHT-30. Weatherproof, puo' essere usato all'esterno.
    Tasse escluse:
    € 27,80
    IVA inclusa:
    € 33,92
      Confronta