Dettagli
This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the other (a ‘hot’ end and a ‘cold’ one). Once this is achieved, a voltage potential is formed and current flows. One junction is held in the environment where the temperature of interest exists, this is known as the hot junction. The other junction, referred to as the cold junction, can typically be found in ICs that specialize in reading the temperatures detected by the thermocouple probe.
This common Type-K Thermocouple is made out of chromel and alumel, while offering a temperature high of 400°C and a low of 0°C. The probe itself is only 200mm (7.8in) long with a diameter of 5mm (~0.2in) and is terminated with a standard thermocouple connector.
Note: This Type-K Thermocouple probe is not intended to be used for food.
Features:
- Type-K
- Standard Thermocouple Connector
- Temperature Range: 0-400°C
- Probe Dia: 5mm
- Probe Material & Length: stainless steel, 200mm
Documents:
- Datasheet (Coming Soon)
Specifiche
Part. No. : | SEN-13715 |
Questions on Thermocouple Type-K - Stainless Steel SEN-13715
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
500198 TC-K-TYPE - THERMOCOUPLE K-TYPE SENSOR -50+700C
THERMOCOUPLE K-TYPE SENSOR -50+700C -
194106 TMP4106_0 - K-Type Probe Thermocouple 11cm
Measure -40 to 400°C with this stainless steel K-type thermocouple probe. -
713612 Thermocouple Connector - PCC-SMP-K
This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. -
713266 SparkFun Thermocouple Breakout - MAX31855K
The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digfalse -
194104 TMP4104 - K-Type Fiberglass Bead Probe Thermocouple (-40°C to +400°C)
The TMP4104 thermocouple can measure temperatures between -40°C to +400°C with a ±0.75°C accuracy. -
808788 Adafruit Si7021 Temperature & Humidity Sensor Breakout Board
This lovely sensor for Silicon labs has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperaturefalse -
808836 Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865
In this sensor, the resistor is actually a small strip of Platinum with a resistance of 100 ohms at 0°C, thus the name PT100. -
808837 Platinum RTD Sensor - PT100 - 3 Wire 1 meter long
For precision temperature sensing, nothing beats a Platinum RTD -
808849 Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K
The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. That's why we are also carfalse -
809081 Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensfalse -
809148 Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated outputfalse -
809291 SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable
Sensore di Umidita'/temperatura, utilizza un Sensirion SHT-30. Weatherproof, puo' essere usato all'esterno.