Dettagli
Freescale’s MAG3110 is a small, low-power, digital 3-axis magnetometer. The device can be used in conjunction with a 3-axis accelerometer to produce orientation independent accurate compass heading information. It features a standard I2C serial interface output and smart embedded functions. It’s also a tiny QFN package which isn’t very easy to play with so here is our easy to use breakout board. This board breaks out all of the pins for the MAG3110 to a standard 0.1" header and also supplies the necessary filtering capacitors so that you can easily use it in your next navigation project.
Features:
- 1.95V to 3.6V Supply Voltage
- 7-bit I2C address = 0x0E
- Full Scale Range ±1000 μT
- Sensitivity of 0.10 μT
- Pull Up Resistor Jumper
Dimensions: 13.3 x 14.5 mm
Documents:
- Schematic
- Eagle Files
- Datasheet (MAG3110)
- Example Code
- GitHub (Design Files)
Specifiche
| Part. No. : | SEN-12670 |
Questions on Triple Axis Magnetometer Breakout - MAG3110
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).|
ESP32-GATEWAY DEVELOPMENT BOARD WITH WIFI BLE ETHERNET 
|
|
HS-5086WP Micro servo digitale waterproof 
Tasse escluse:
€ 35,50
IVA inclusa:
€ 43,31
|
-
714215 SparkFun gamer:bit
Tasse escluse:€ 9,70IVA inclusa:€ 11,83 -
714142 Sewable LED Ribbon - 1m, 25 LEDs...
Tasse escluse:€ 11,00IVA inclusa:€ 13,42 -
714140 Sewable LED Ribbon - 1m, 25 LEDs...
Tasse escluse:€ 11,00IVA inclusa:€ 13,42 -
714138 Sewable LED Ribbon - 1m, 50 LEDs...
Tasse escluse:€ 16,50IVA inclusa:€ 20,13 -
714277 Raspberry Pi Zero W
Tasse escluse:€ 12,50IVA inclusa:€ 15,25
Non ci sono prodotti da comparare
-
CMPS11 - Tilt Compensated Compass Module
Tasse escluse:€ 25,35IVA inclusa:€ 30,93Non disponibile
-
-
-
-
-
-
Raspberry Pi B+ - GPIO Shrouded Header (2x20)
Tasse escluse:€ 0,75IVA inclusa:€ 0,92Non disponibile
-
Cavetti Jumper M/F - 15cm 10pz
Prezzo di listino:€ 3,62OffertaTasse escluse:€ 2,20IVA inclusa:€ 2,68Non disponibile
