This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on the Raspberry Pi.
The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Brown), TX (Tan-like/Peach), VCC (Red), and GND (Black). A link to the FTDI drivers can be found in the Documents section below.
|Part. No. :||CAB-12977|
Questions on USB to TTL Serial Cable
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
500181 USB-SERIAL-CABLE USB serial console cableUSB-SERIAL-CABLE USB serial console cableTasse escluse:€ 5,65IVA inclusa:€ 6,89
807965 USB to TTL Serial Cable - Debug / Console Cable for Raspberry PiThe cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the bigfalseTasse escluse:€ 10,75IVA inclusa:€ 13,12
808520 FTDI Serial TTL-232 USB CableThis is a USB to TTL serial cable, with a FTDI FT232RL usb/serial chip embedded in the head. It has a 6-pin socket at the endfalseTasse escluse:€ 16,82IVA inclusa:€ 20,52