*BZZZZZZZZZZ* Feel that? That's your little buzzing motor, and for any haptic feedback project you'll want to pick up a few of them. These vibe motors are tiny discs, completely sealed up so they're easy to use and embed.
Two wires are used to control/power the vibe. Simply provide power from a battery or microcontroller pin (red is positive, blue is negative) and it will buzz away. Works from 2V up to 5V, higher voltages result in more current draw but also a stronger vibration.
If you want to reduce the current draw/strength (for example, to control it directly from an Arduino pin) try putting a resistor (100 to 1000 ohms) in series. For full power control, a small PN2222 transistor can control a motor easily, some experimentation may be required!
- Dimension: 10mm diameter, 2.7mm thick
- Voltage: 2V - 5V
- 5V current draw: 100mA, 4V current draw: 80mA, 3V current draw: 60mA, 2V current draw: 40mA
- 11000 RPM at 5V
- Weight: 0.9 gram
|Part. No. :||1201|
Questions on Vibrating Mini Motor Disc
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
510049 VIBRATING-MOTOR - FLAT VIBRATING MOTOR 10 MM 3VFlat vibrating motor with 10 mm diameter. 3V power supply.Tasse escluse:€ 1,80IVA inclusa:€ 2,20
Prezzo IVA incl.Confronta