120198 Waterproof DS18B20 Digital Temperature Sensor for Arduino

Waterproof DS18B20 Digital Temperature Sensor for Arduino

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions.
Categorie
Prezzi IVA inclusa
€ 7,19 Prezzo
€ 5,89 + VAT

 

Dettagli

This is a waterproofed version of the DS18B20 Temperature sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC so we suggest keeping it under 100°C. Because they are digital, you don't get any signal degradation even over long distances! The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.Usable with 3.0-5.5V systems. 
 
Because each DS18B20 contains a unique silicon serial number, multiple DS18B20s can exist on the same 1-Wire bus. This allows for placing temperature sensors in many different places. Applications where this feature is useful include HVAC environmental controls, sensing temperatures inside buildings,equipment or machinery, and process monitoring and control.
  

 

 

 

SPECIFICATION}

 

 

  • Usable with 3.0V to 5.5V power/data
  • ±0.5°C Accuracy from -10°C to +85°C
  • Usable temperature range: -55 to 125°C (-67°F to +257°F)
  • 9 to 12 bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into chip
  • Multiple sensors can share one pin
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • 3 wires interface:
    • Type A
      • Red wire  - VCC
      • Black wire - GND
      • Yellow wire - DATA
    • Type B (Recently there's a series of sensors using this pin mapping. Sorry for the inconvenience.)
      • Red wire  - VCC
      • Yellow wire - GND
      • Green wire - DATA
  • Stainless steel tube 6mm diameter by 35mm long
  • Cable diameter: 4mm(0.16)
  • Length: 90cm(35.43")
 
 

 

 

 

DOCUMENTS

 

 

 

 

 

SHIPPING LIST

 

 

  • Waterproof DS18B20 Digital temperature sensor         x1

Specifiche

Part. No. : DFR0198

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Waterproof DS18B20 Digital Temperature Sensor for Arduino

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. DS18B20 - Sensore di temperatura digitale waterproof

    711050 DS18B20 - Sensore di temperatura digitale waterproof

    Sensore di temperatura digitale DS18B10 prodotto dalla Maxim, inglobato in contenitore a tenuta stagna, completo di cavo a 3 fili.
    Tasse escluse:
    € 11,84
    IVA inclusa:
    € 14,44
      Confronta
  2. DIGITAL CALIBRATED TEMPERATURE SENSOR WITH 1-WIRE INTERFACE

    510052 DIGITAL CALIBRATED TEMPERATURE SENSOR WITH 1-WIRE INTERFACE

    Sensore di Temperatura DS18B20 con interfaccia 1-wire e cavo da 1 metro
    Tasse escluse:
    € 3,00
    IVA inclusa:
    € 3,66
      Confronta
  3. SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable

    809291 SHT-30 Mesh-protected Weather-proof Temperature/Humidity Sensor - 1M Cable

    Sensore di Umidita'/temperatura, utilizza un Sensirion SHT-30. Weatherproof, puo' essere usato all'esterno.
    Tasse escluse:
    € 27,80
    IVA inclusa:
    € 33,92
      Confronta