The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 1A at 12vdc. The relays are SPCO (Single Pole Change Over) types. The normally open, normally closed and common pins are all available on the screw terminals.
The Relays on the WIFI002 can be controlled from the inputs on the WIFI484. This offers the opportunity to construct a system where an input can control an output anywhere on the earth provided both locations are connected to the network/internet.
-20C to +70C
The WIFI002 provides an LED to indicate each of the relay states and three for board status, these are:
Board power - red LED
WIFI connected - yellow LED
USB connected - green LED
|Part. No. :||WIFI002|
Questions on WIFI002 - 2 Relays at 16A
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).
Tasse escluse:€ 77,60IVA inclusa:€ 94,67