-
Home
- 808313
Dettagli
Play the shield pls notice that
- Be sure to plug the WRTnode into the shield as the picture, Be sure DONOT go wrong direction.
- For the power we recommend a 5V USB-interface adapter higher than 1000mA, when more USB devices plugged in, we recommend a 2A or 2.5A adapter, such as your ipad one.
- How to with U-Boot web-page fail-safe de-brick button:
- An original WRTnode U-Boot WRTnode_U-Boot_instructions will provide this, if there's another U-Boot have been flashed, this section is invalid.
Instruction:
- Set your computer Ethernet with the IP: 192.168.1.100 and the mask: 255.255.255.0, connect computer and the shield with RJ45 wire.
- Push the button( in this case to prevent misoperation, we use a very tight button, please make sure to hold the button tightly with nail or blunt object.)
- Power on
- WRTnode sense the pushed button, the led indication on WRTnode will flash for about 5 seconds.
While, we could use web browser in the computer with URL: http://192.168.1.1/ to flash the ROM.
Specification:
- 5V micro-USB DC-in
- Extend 4 standard USB port
- 1 RJ45 100M Ethernet port( to be a LAN port or WAN port as you define)
- other interfaces:
- UART
- I2C( while could multiused as GPIO * 2)
- SPI
- GPIO*12
- Uboot web-page fail-safe de-brick button
- 5v and 3.3v pins
Specifiche
Part. No. : | 114990197 |
Tags prodotto
Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.
Questions on WRTnode Standard Shield
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).
Prodotti
- Arduino
- Teensy (Arduino)
- Automazione
- Grove (Arduino)
- Raspberry PI
- Elettronica
- Educational
- Zoccoli, Strips e Jumpers
- Cavi
- Linux Embedded
- Phidgets
- Microcontrollori
- Schede
- Suono e Voce
- Sensori
- IoT
- Comunicazione
- Radio & Wireless
- Display & LED
- Video
- Robot in Kit
- Meccanica e Materiali
- MakerBeam
- Servi DYNAMIXEL
- Servi
- Motori
- Motoriduttori
- Motori Passo Passo
- Controllo Motori & Servi
- Energia
- Strumentazione
- Attrezzatura
- Software
- Libri
- Occasioni
Prodotti Consigliati
0.4mm Heat Resistant Welding Wire (Red) ![]() Tasse escluse:
€ 11,00
IVA inclusa:
€ 13,42
|
7” 800x480 TFT DSI Capacitive Touchscreen (Compatible with Raspberry Pi 4B/3B+/3B) ![]() Tasse escluse:
€ 68,00
IVA inclusa:
€ 82,96
|
Nuovi prodotti
-
809503 dSX42L - dScript expansion module
Tasse escluse:€ 30,83IVA inclusa:€ 37,61 -
809501 dSX42K - dScript expansion module
Tasse escluse:€ 47,74IVA inclusa:€ 58,24 -
809504 dSX42H - dScript expansion module
Tasse escluse:€ 29,83IVA inclusa:€ 36,39 -
809502 dS2242 - 2 x 16A ethernet relay
Tasse escluse:€ 61,15IVA inclusa:€ 74,60 -
809505 dS2408 - 8 relays and 40 opto in...
Tasse escluse:€ 122,02IVA inclusa:€ 148,86
Compara Prodotti
Non ci sono prodotti da comparare
Prodotti Simili
-
Adafruit WICED WiFi Feather - STM32F205 with Broadcom WICED WiFi
Tasse escluse:€ 32,51IVA inclusa:€ 39,66Non disponibile
-
SparkFun ESP32 Thing Power Control Shield
Tasse escluse:€ 26,75IVA inclusa:€ 32,64Non disponibile
Dallo stesso Produttore