Communication/USB

The XBee - USB Board has been designed to allow an easy and reliable connection between the Xbee’s modules and PC. XBee and XBeePRO modules ...

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<...

  FEATURES: USB to serial cable three wires for Breadboard connection SERIAL output 3.3V voltage levels GND=BLUE, RX(INPUT)=GREEN, TX(OUTPUT)=RED ...

  USB-ISO is USB Full speed USB 2.0 compliant port isolator with 1000V isolation voltage. This device is very useful as protects your PC compute...

Just about all electronics use TTL serial for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a seria...

   FEATURES: MCU: PIC18F14K50 20-Pin USB Flash Microcontrollers with nanoWatt XLP Technology. mini USB connector status led male U...

The SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. It works with 5V and 3.3V systems and s...

Implements CH340 Fully open hardware design USB mini connector - USB 2.0 Full Speed compatible Serial interface with variable baud rate - 50 bps ...

  The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered from the USB cable and can supply ...

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the ...