Electronics/Connectors

This is a great DC power jack/connector for projects in an enclosure. This is a common barrel-type power jack for DC wall supplies, in a panel-moun...

We don't really know what to call this thing - it's got a 10 pin IDC cable on one end 6 inches of rainbow ribbon and tipped with 0.1" female socket...

This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/ca...

  This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all o...

This 12 position terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed togethe...

This 2x20-pin strip male header is a great way to add pins to 2x20 0.1" holes in a PCB.  They're also perfect companion piece to our 2x20-pin right...

This 3 position terminal block provides a simple way to connect wires to a single connection point. These blocks allow wires to be screwed together...

SD cards are all over the place and they’re great for storing large amounts of data. Why not take advantage by adding an SD socket to your next dat...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Eac...

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Eac...

This 2x20-pin strip, right-angle female header is a perfect companion piece to our 2x20-pin Dual Male Header.  It's a great way to add right-angle ...

Vertical surface mount connector for the EM406 and EM401 data cables. Part #: BM06B-SRSS-TB Documents: Connector Datasheet and Footprint

This is a very simple RJ45 PoEthernet MagJack connector that can help connect you to the Internet with the ability to provide power. Power over Eth...

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Plug to Terminal Block Breakout. You get a nice solid PCB with an DE-9...

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 unit...

Make your own custom DE-9 cable or DE-9 interface with ease, using this DE-9 Socket to Terminal Block Breakout. You get a nice solid PCB with an DE...

 The thermocouple adapter lets you connect an Omega K-type Thermocouple with Miniature Male Connector to the: 1051 - PhidgetTemperatureSensor 1-I...

Keep the outdoors out of your project! This is the threaded sealing cap that fits onto the Weatherproof Panel Mount USB-B connectors. The cap maint...

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).   ...

We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right si...

These are high-current XT60 connectors commonly used in the RC hobby industry. They are sold as matching male-female pairs and are great for projec...

Surface mount vertical 5-pin 1.0mm pitch connector for connecting to the EM-408 interface cable. Documents: EM408-SMDConnector.pdf

This convenient 3.5mm/1.1mm or 5.5mm/2.1mm DC Jack adapter  2.1mm inner diameter (5.5mm outer diameter) is the most common type of DC plug, but you...