Olimex

This is a passive electrode for a SHIELD-EKG-EMG shield which allows Arduino like boards to capture Electrocardiography Electromyography signals. T...

PROFESSIONAL EKG-EMG CABLE WITH SNAP CONNECTOR FOR GEL ECG ELECTRODES

Dielectric strength 1000VAC/MIN  Rated input current:0-100A Output: 0-50mA or 0-1V Opening size: 13mm×13mm Non-linearity±3% (10%-120% rated input...

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. The detection r...

Temperature sensor for temperatures in range -30+110C with 1% precision. Perfect for measuring of fluids, air temperature, refrigrrators, freezers,...

  This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are not...

THERMOCOUPLE K-TYPE SENSOR -50+700C

Typically this splitter board comes in handy when you have to connect more than one I2C module to an Olimex board. It can also help to connect thre...

The adapter is supported in Linux distributions for OLinuXino boards.

  USB-ISO is USB Full speed USB 2.0 compliant port isolator with 1000V isolation voltage. This device is very useful as protects your PC compute...

  FEATURES: USB to serial cable three wires for Breadboard connection SERIAL output 3.3V voltage levels GND=BLUE, RX(INPUT)=GREEN, TX(OUTPUT)=RED ...

A low cost and very compact Li-Po battery charger, based on Microchip MCP73833 with three status LEDs for displaying the battery status, works with...