RFID
An RFID tag is an object that can be applied to or incorporated into a product, animal, or person for the purpose of identification using radio waves. Some tags can be read from several meters away and beyond the line of sight of the reader.
Most RFID tags contain at least two parts. One is an integrated circuit for storing and processing information, modulating and demodulating a (RF) signal, and other specialized functions. The second is an antenna for receiving and transmitting the signal. A technology called chipless RFID allows for discrete identification of tags without an integrated circuit, thereby allowing tags to be printed directly onto assets at a lower cost than traditional tags.
-
501364PN532 NFC/RFID controller breakout board - v1.3
Il PN532 e' il piu' diffuso chip NFC, e' quello che si trova nella maggior parte dei telefoni o dispositivi che utilizzano l'NFC. Learn More -
713198SparkFun RFID Starter Kit
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the g... Learn More -
808413NFC Module for Raspberry Pi
EXPLORE-NFC is a high performance fully NFC compliant expansion board. Based on the NXP PN512 solution, EXPLORE-NFC meets compl... Learn More -
510037MOD-RFID1356MIFARE - NFC RFID READER WRITER FOR 13.56MHZ NFC MIFARE RFID TAGS
MOD-RFID1356MIFARE can read and write NFC / Mifare RFID tags operating at 13.56Mhz. MOD-RFID1356MIFARE uses NXP PN532 to read a... Learn More -
510039RFID1356-ISO-MIFARE - RFID 13.56 MHZ MIFARE CLASSIK 1K TAG ISO CARD
RFID 13.56 MHZ MIFARE CLASSIK 1K TAG ISO CARD Learn More -
510040RFID1356-KEY-MIFARE - RFID 13.56 MHZ MIFARE CLASSIK 1K TAG KEYCHAIN
RFID 13.56 MHZ MIFARE CLASSIK 1K TAG KEYCHAIN Learn More -
510045RFID1356-STI-25MM-MIFARE - RFID 13.56 MHZ MIFARE CLASSIK 1K TAG STICKER 25MM
RFID 13.56 MHZ MIFARE CLASSIK 1K TAG STICKER 30 MM X 0.25 MM Learn More -
120314NFC Tag (Round)
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and eas... Learn More -
120231NFC Module for Arduino
NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and eas... Learn More -
2010241024 - PhidgetRFID Read-Write
Il PhidgetRFID Read-Write legge Tags RFID portati in prossimita' del lettore e restituisce l'identificatore del Tag. Supporta l... Learn More -
714066SparkFun Simultaneous RFID Reader - M6E Nano
Lettore/Scrittore di TAG RFID basato sul reader M6E Nano, utilizzabile come Shield Arduino Learn More -
808225RFID tag combo (125khz) - 5 pcs
RFID mixed tags. 125Khz, EM4100 standard. Learn More -
808140MiFare Classic (13.56MHz RFID/NFC) Card - 1KB
These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other enco... Learn More -
808068HydraNFC Shield and HydraNFC Antenna
The HydraNFC is a NFC shield hardware to sniff, read/write or emulate any 13.56MHz NFC tags (with the help of direct modes) for... Learn More -
501789Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty muc... Learn More -
115075Mifare-One RFID card (13.56Mhz)
Mifare-One RFID card (13.56Mhz) Learn More -
115076Mifare-One RFID Tag (13.56MHz)
Mifare-One RFID card (13.56Mhz) Learn More -
711828RFID Reader ID-20LA (125 kHz)
This is the ID-20LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is t... Learn More -
711827RFID Reader ID-12LA (125 kHz)
This is the ID-12LA, a very simple to use RFID reader module from ID Innovations. With a built in antenna, the only holdup is t... Learn More -
711862RFID Reader ID-3LA (125 kHz)
This is the ID-3LA, a very simple to use RFID reader module from ID Innovations. The only holdups are the 2mm pin spacing and y... Learn More -
1939153915 - T5577 RFID Tag - PVC Card
This RFID tag encased in a glossy white plastic card fits conveniently into a wallet and is ideal for access control or member ... Learn More -
1939163916 - T5577 RFID Tag - ABS Key Fob
This tag is shaped like a keyfob so it can be conveniently attached to a keyring or lanyard. Learn More -
1939193919 - T5577 RFID Tag - PVC Disc 15mm
This tag is a PVC plastic disc measuring 15mm in diameter. It can be glued to flat surfaces for object identification applicati... Learn More -
807917Grove - NFC Tag
Grove - NFC Tag is a highly integrated Near Field Communication Tag module,this module is I2C interface,which base on M24LR64E-... Learn More -
710128RFID Tag - 13.56MHz - Transparent
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identificat... Learn More -
501363RFID Tag - 13.56MHz - Keyfob
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identificat... Learn More -
115041Grove - 125KHz RFID Reader
The Grove-125KHz TFID Reader is a module used to read uem4100 RFID card information with two output formats: Uart and Wiegand. ... Learn More -
500151RFID Tag 13.56MHz - ISO card
RFID tags operating at 13.56MHz. EM4233 standard, 64bit, read-only. Learn More -
500154MOD-RFID1356-BOX USB RFID READER FOR 13.56MHZ TAGS WITH EMULATIO
USB plug in module, works with every USB host which supports HID Keyboard and CDC Learn More -
710127RFID Tag - 13.56MHz - Token
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identificat... Learn More -
710131RFID Tag - 13.56MHz - button
This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identificat... Learn More -
710126SM130 RFID Module @13.56MHz
The SMB130 is a 28 pin DIP module that includes all necessary components for a 13.56 MHz RFID Mifare, aside from a PCB antenna. Learn More -
710406RFID Evaluation Shield - 13.56MHz
This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layo... Learn More -
709963RFID USB Reader
The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader in... Learn More -
316011Tag RFID - 125KHz - Clamshell
This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. Clamshell form factor Learn More -
316005MOD-RFID125-BOX USB RFID READER FOR 125 KHZ TAGS
USB RFID READER FOR 125 KHZ TAGS WITH EMULATION OF KEYBOARD AND RS232 Learn More -
316004MOD-RFID125 USB RFID READER FOR 125 KHZ TAGS
USB RFID READER FOR 125 KHZ TAGS WITH EMULATION OF KEYBOARD AND RS232 Learn More -
500155MOD-RFID1356 USB RFID READER FOR 13.56MHZ TAGS WITH EMULATIO
USB plug in module, works with every USB host which supports HID Keyboard and CDC Learn More